High lithium storage of Co3O4 enabled by integrating hollow and porous carbon scaffolds

The Co₃O₄, as a potential anode of lithium-ion batteries, has gained considerable attention because of high theoretical capacity. However, the Co₃O₄ is suffering from serious structure deterioration and rapid capacity fading due to its bulky volume change during cyclic charge/discharge process. Herein, to stabilize the lithium storage performance of the Co₃O₄ nanoparticles, a characteristic carbon scaffold (HPC) integrating hollow and porous structures has been fabricated by a well-designed method for the first time. The ultrafine Co₃O₄ nanoparticles are cleverly anchored on the HPC (HPC@Co₃O₄) and hence achieve significantly improved electrochemical properties including high capacity, improved reaction kinetics and outstanding cycle stability, showing high capacity of 1084.7 mAh g^-1 after 200 cycles at 200 mA g^-1 as well as 681.4 mAh g^-1 after 300 cycles at 1000 mA g^-1. The HPC@Co₃O₄ therefore shows good promising for application in advanced lithium-ion battery anodes. The results of the systematically material and electrochemical characterizations indicate that the synergistic effects of ultrafine Co₃O₄ nanoparticles and well-designed HPC scaffolds are responsible for the outstand performance of the HPC@Co₃O₄ anode. Moreover, this work can enrich the understanding and development of stable and high-performance metal oxide-based lithium-ion battery anodes for advanced lithium storage.     

An agent-based procedure with an embedded agent learning model for residential land growth simulation: The case study of Nanjing,China

The agent-based modelling (ABM) is commonly used to simulate urban land growth. A key challenge of ABM for the simulation of urban land-use dynamics in support of sustainable urban management is to understand and model how human individuals make and develop their location decisions that then shape urban land-use patterns. To investigate this issue, we focus on modelling the agent learning process in residential location decision-making process, to represent individuals' personal and interpersonal experience learning during their decision-making. We have constructed an extended reinforcement learning model to represent the human agents' learning when they make location decisions. Consequently, we propose and have developed a new agent-based procedure for residential land growth simulation that incorporates an agent learning model, an agent decision-making model, a land use conversion model, and the impacts of urban land zoning and the developers' desires. The proposed procedure was first tested by using hypothetical data. Then the model was used for a simulation of the urban residential land growth in the city of Nanjing, China. By validating the model against empirical data, the results showed that adding agent learning model contributed to the representation of the agent's adaptive location decision-making and the improvement of the model's simulation power to a certain extent. The agent-based procedure with the agent learning model embedded is applicable to studying the formulation of urban development policies and testing the responses of individuals to these policies.     

Rapid screening of DON contamination in whole wheat meals by Vis/NIR spectroscopy and computer vision coupling technology

This work intends to develop an online experimental system for screening of deoxynivalenol (DON) contamination in whole wheat meals by visible/near-infrared (Vis/NIR) spectroscopy and computer vision coupling technology. Spectral and image information of samples with various DON levels was collected at speed of 0.15 m s⁻¹ on a conveyor belt. The two-type data were then integrated and subjected to chemometric analysis. Discriminant analysis showed that samples could be classified by setting 1000 μg kg⁻¹ as the cut-off value. The best correct classified rate obtained in prediction was 93.55% based on fusion of spectral and image features, with reduced prediction uncertainty as compared to single feature. However, quantification of DON by quantitative analysis was not successful due to poor model performance. These results indicate that, although not accurate enough to provide conclusive result, this coupling technology could be adopted for rapid screening of DON contamination in cereals and feeds during processing.     

Effect of sintering temperature on solidification and migration of non-volatile and volatile heavy metals in glass-ceramic

Using tailings as material to prepare glass-ceramic is an excellent way to achieve the resource utilization of solid waste. However, at present, researches on the solidification and migration of heavy metals are limited. Therefore, in this study, ten groups of samples were prepared by controlling sintering temperatures. The solidification, migration, and leaching behavior of non-volatile and volatile heavy metals were studied. The research showed that, with the increase of temperature, the properties of the samples were improved. Fe participated in the phase transformation and evolved into insoluble iron pyroxenes solid solution, while Pb was homogeneously distributed in the glass matrix of glass-ceramics. The leaching concentrations of Fe and Pb in the glass-ceramics were 0.055 mg/L ～0.087 mg/L and 0.074 mg/L ～0.140 mg/L, which were far below the threshold value. The results showed that heavy metals can be effectively solidified in glass-ceramics and have good environmental benefits.     

Maximum Data Generation Rate Routing Protocol Based on Data Flow Controlling Technology for Rechargeable Wireless Sensor Networks

For rechargeable wireless sensor networks, limited energy storage capacity, dynamic energy supply, low and dynamic duty cycles cause that it is unpractical to maintain a fixed routing path for packets delivery permanently from a source to destination in a distributed scenario. Therefore, before data delivery, a sensor has to update its waking schedule continuously and share them to its neighbors, which lead to high energy expenditure for reestablishing path links frequently and low efficiency of energy utilization for collecting packets. In this work, we propose the maximum data generation rate routing protocol based on data flow controlling technology. For a sensor, it does not share its waking schedule to its neighbors and cache any waking schedules of other sensors. Hence, the energy consumption for time synchronization, location information and waking schedule shared will be reduced significantly. The saving energy can be used for improving data collection rate. Simulation shows our scheme is efficient to improve packets generation rate in rechargeable wireless sensor networks.     

总变差模型在书画打印宣纸印刷质量预测中的应用

为了建立适用于书画打印宣纸印刷质量的预测模型,本研究测量了14种书画打印宣纸的粗糙度、白度、不透明度、定量、光泽度和针对宣纸特别设定的帘纹深浅以及帘纹疏密度等表面物理参量,并在相同条件下,使用喷墨打印设备输出并测量印品色度值,利用总变差模型构建去除帘纹色差的测定方法,得到与人眼视觉特征相符的色差。运用GRNN广义回归神经网络结合书画打印宣纸表面物理参量与宣纸去帘纹后的色差值,建立预测模型。结果表明,该模型能够在仅测量书画打印宣纸表面物理参量的情况下,便能较为准确地预测书画打印宣纸印刷质量,为书画打印宣纸印刷前的选纸工作提供指导依据。     

Microwave-assisted metal-catalyzed pyrolysis of low-rank coal: Promising option towards obtaining high-quality products

Microwave-assisted catalytic pyrolysis is considered to be a promising technology for coal-staged conversion due to its high efficiency and selectivity. This work was undertaken to investigate the pyrolysis behavior and products quality of microwave-assisted pyrolysis of low rank coal catalyzed by metallic catalysts (K, Ca and Fe) with both dielectric response and catalytic effect via a microwave tube furnace. The mechanism of metallic catalysts on catalytic cracking tar under microwave radiation was also investigated. The dielectric properties and physicochemical structure of coal chars were characterized by a vector network analyzer, XRD, FT-IR, SEM, EDS, and Raman. The chemical structure characteristics of generated tars were determined by FT-IR and GC-MS. Results manifested that microwave interacted preferentially with metal catalysts by polarization and conductivity loss could efficiently induce the occurrence of catalytic pyrolysis reactions to generate high yield syngas (CO + H₂). Specifically, the dielectric loss factor of resultant chars was considerably improved with the introduction of metallic catalysts especial for Ca and Fe. Furthermore, it is found that metal catalysts dramatically enriched the amorphous carbon structure in produced chars whereas in favour of suppressing the trend of carbon graphitization. Additionally, the transformation of larger polycyclic aromatic compounds into lighter tar species was catalytically accelerated, resulting in the large proportion of single-ring aromatics in tar under the synergistic effect between microwave and metal catalysts.     

MAPP/EAA处理对聚丙烯/小麦秸秆粉复合材料性能的影响

研究了马来酸酐接枝聚丙烯（MAPP）、乙烯丙烯酸共聚物（EAA）处理对聚丙烯（PP） /小麦秸秆粉（WSP）复合材料性能的影响。结果表明，随着体系中MAPP质量份数的增加，PP/WSP的拉伸强度和弯曲强度均逐渐增大，但冲击强度却先增加后减小，复合材料达到塑化峰的时间逐渐延长；使用EAA后，无论体系中是否已经使用了MAPP，PP/WSP的拉伸、弯曲和冲击强度均可得以提高，特别对于未使用MAPP的体系，效果更加明显，可分别提高65.04 %、45.42 %和6.75 %，储能模量增加，表面疏水性增强，平衡扭矩从13.9 N·m降至11.8 N·m，吸水尺寸变化率及吸水率下降，吸水平衡时间缩短；使用EAA可改善PP/WSP中WSP与PP间的界面结合，改善PP/WSP力学性能、热稳定性能、表面疏水性能、尺寸稳定性能和加工性能，降低其吸水率。     

苏通GIL运输专用机具动力电池类型探讨

GIL运输专用机具是为安全、可靠、高效地完成苏通GIL综合管廊工程GIL单元的运输任务而研制的专用机具,其中动力电池系统设计是整机设计的重点之一。通过对各种常见动力电池优缺点的分析,并结合苏通GIL运输专用机具对动力电池的需求分析,确定了动力电池系统的技术路线,为苏通GIL运输专用机具的研制提供了坚实的基础。